There are many mounts available for vehicle cradles....
How the vehicle mounts fit to the cradle
The vehicle cradles all have 4 mounting holes in the standard 'AMPS' pattern, these align with the AMPS plate on the mount . Using the 4 x stainless steel screws, washers and lock nuts, simply fix the cradle onto the Suction Mount's plate.
GN079WD-SBH-AMPS The standard suction mount comes complete with mounting screws when purchased with a CoS Vehicle cradle and a 'Sticky Plate' which is a self adhesive pad that can be stuck on rough or textured surfaces allowing the suction mount to be stuck to it.
Suitable for light weight phones
RM080AMPS Our most popular is the rugged windscreen mount Vehicle Cradle Suction Cup Mount Kit VCSCMK-H :-
A heavy weight suction mount using a similar 'ball and socket' joint as the RAM mounts, comes complete with mounting screws when purchased with a CoS Vehicle cradle
A 'Sticky Plate' is available separately which is a self adhesive pad that can be stuck on rough surfaces allowing the suction mount to be stuck to it.
Suitable for most devices
FLBK256AMPS A rugged mount intended to mount a vehicle cradle to a forklift truck pillar or similar.
Uses a similar 'ball and socket' joint system as the RAM mount system and comes complete with mounting screws when purchased with a CoS Vehicle cradle.
Various lengths of arm are available but the normal arm gives a distance of 19cm from the pillar to the back of the cradle
CPM01B A clamp mount that can be used to mount a vehicle cradle to a pipe 6 to 50 mm dia or to or table surface or similar 5 to 45 mm thick
Uses a similar 'ball and socket' joint system as the RAM mounts comes complete with mounting screws when purchased with a CoS Vehicle cradle.
Various lengths of arm are available.
FIXED MOUNT A hybrid of vehicle mount and desk top cradles enabling a hand held PDA to be mounted on a desk or even a floor stand. Power is provided from a mains power supply
DS450 A telescopic and fully articulated floor or desk stand that can be used to hold a cradle at a convenient height of between 0.25m to 1 m
Uses a 'ball and socket' joint system comes complete with mounting screws when purchased with a suitable CoS Vehicle cradle.
The basic tilt and swivel mount
TILT & SWIVEL - 1650
The simplest mount is the tilt and swivel mount which is included with vehicle cradles that ship without another mount.
It can be used to fix a Vehicle cradle to the dash
TABLET MOUNTS A mount designed to securely hold a tablet in a vehicle, both locking and non locking. CALL FOR DETAILS
Suction Mounts Forklift Mounts Clamp Fixed Table Tablet
See Below for details, but we suggest you contact us for advice.
HDAM A heavy duty, fully articulated, 25 cm long arm that can be fixed to a surface example a table or wall using the screws provided. It can position a device in a convenient operating position. One end has a standard AMPS mounting to fix to a device cradle, the other has screw fixing holes to allow the arm to be mounted to a wall or other suitable surface. It could be used as a fixed mount hands free scanning solution.
Uses a 'ball and socket' joint system
All of our vehicle cradles can be fixed using the AMPS mounting, comes complete with mounting screws when purchased with a suitable CoS Vehicle cradle.
VCM100-S A 102mm mount that can be screwed to a surface and the AMPS pattern allows the other end of the mount to be fixed to the vehicle cradle. Includes security screw and allen key to prevent tampering
Comes complete with mounting screws when purchased with a CoS Vehicle cradle
VCM127-S A 127mm mount that can be screwed to a surface and the AMPS pattern allows the other end of the mount to be fixed to the vehicle cradle. Includes security screw and allen key to prevent tampering
Comes complete with mounting screws when purchased with a CoS Vehicle cradle